View ASB680C801FD0LF_8393008.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com p 0102_asb ? 4/6/2016 benefts ? h igh reliability: realization of mttf = 36,000 hours at 85c and 100 v ? b uilt-in pre-load mechanism and mounting attachments allowing for easier installation ? a ccurate nanometer positioning ? m inimum mechanical abrasion ? l arge generated force of 800 n ? l ong operational life ? r ohs/reach compliant overview multilayer piezoelectric actuators are ceramic elements used to convert electrical energy into mechanical energy such as displacement or force by utilizing the piezoelectric longitudinal effect. kemets multilayer piezoelectric actuators are produced based on our unique element structure design and piezoelectric ceramic materials with high electrostrictive factors. compared to conventional piezoelectric actuators, they are smaller in size but can generate higher displacements and forces at low voltages. the asb metal sealed 85c series actuators are less impacted by ambient humidity due to insulation from the atmosphere. as a result, long operational life and high performance have been attained which are ideal for use in various high reliability applications such as semiconductor device production equipment and optical communication equipment. multilayer piezoelectric actuators asb series metal sealed 85c applications typical applications include fne adjustment of various x-y table steppers, mirror/prism positioning, linear motors, fuid fow control valve drive, vibration source and manipulators. ordering information as b 170 c 801 n d 0 lf series housing construction and operating temperature range nominal displacement (m) maximum voltage (vdc) generated force (n) mount confguration drive block confguration new design environmental compliance as = encapsulated in metal case b = bellows (pre-load), maximum operating temperature of 85c the frst two digits specify the displacement values. the last digit is an exponent of 10. example: 170 = 17 m the frst two digits specify the values. the last digit is an exponent of 10. example: 801 = 800 n = 80 kgf n = female thread type f = flange type d = v groove sequentially numbered starting from zero. lf = rohs/ reach compliant (see environmental compliance below) one world. one kemet
2 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com p 0102_asb ? 4/6/2016 female thread type all specifcations in this catalog and production status of products are subject to change without notice. prior to the purchase, please contact nec tokin for updated product data. please request for a specifcation sheet for detailed product data prior to the purchase. before using the product in this catalog, please read "precautions" and other safety precautions listed in the printed version catalog. 2015.02.06 9470mpavol08e1501h1 female thread type flange type p type no flange type d type 90 2.2 product appearance example 14 multilayer piezoelectric actuators vol.08 0rgho /pp asb170c801nd0lf 38.4 asb340c801nd0lf 58.4 asb510c801nd0lf 78.4 asb680c801nd0lf 98.4 )odqjh7sh all specifcations in this catalog and production status of products are subject to change without notice. prior to the purchase, please contact nec tokin for updated product data. please request for a specifcation sheet for detailed product data prior to the purchase. before using the product in this catalog, please read "precautions" and other safety precautions listed in the printed version catalog. 2015.02.06 9470mpavol08e1501h1 female thread type flange type p type no flange type d type 90 2.2 product appearance example 14 multilayer piezoelectric actuators vol.08 0rgho /pp asb170c801fd0lf 32.4 asb340c801fd0lf 52.4 asb510c801fd0lf 72.4 ASB680C801FD0LF 92.4 all specifcations in this catalog and production status of products are subject to change without notice. prior to the purchase, please contact nec tokin for updated product data. please request for a specifcation sheet for detailed product data prior to the purchase. before using the product in this catalog, please read "precautions" and other safety precautions listed in the printed version catalog. 2015.02.06 9470mpavol08e1501h1 dimensions common to asb, asl and ahb series female thread type flange type enlarged of section a p type top view bottom view [mm] section a 17 19.60.5 11.50.5 17 m4 screw of min. 3 deep lead wire: awg26, ul1993 red color: white color: prepared hole of max. 5 deep 190.5 90.2 2.50.2 13010 l0.5 2 d type 2.2 90 direction of displacement [mm] section a 17 350.5 11.50.5 4 3.5 top view bottom view 45 45 13010 l0.5 2 p.c.d.28 13.0 0.5 3.00.2 2.50.2 direction of displacement enlarged of section a p type lead wire: awg26, ul1993 red color: white color: d type 2.2 90 model l mm asb170c801np0lf 38.4 asl170c801np0lf asb340c801np0lf 58.4 asl340c801np0lf asb510c801np0lf 78.4 asl510c801np0lf asb680c801np0lf 98.4 asl680c801np0lf model l mm ahb550c801np0lf 58.4 ahb700c801np0lf 78.4 ahb800c801np0lf 78.4 both p type and d type have the same overall lengths model l mm asb170c801fp0lf 32.4 asl170c801fp0lf asb340c801fp0lf 52.4 asl340c801fp0lf asb510c801fp0lf 72.4 asl510c801fp0lf asb680c801fp0lf 92.4 asl680c801fp0lf model l mm ahb550c801fp0lf 52.4 ahb700c801fp0lf 72.4 ahb800c801fp0lf 72.4 both p type and d type have the same overall lengths 16 multilayer piezoelectric actuators vol.08 all specifcations in this catalog and production status of products are subject to change without notice. prior to the purchase, please contact nec tokin for updated product data. please request for a specifcation sheet for detailed product data prior to the purchase. before using the product in this catalog, please read "precautions" and other safety precautions listed in the printed version catalog. 2015.02.06 9470mpavol08e1501h1 dimensions common to asb, asl and ahb series female thread type flange type enlarged of section a p type top view bottom view [mm] section a 17 19.60.5 11.50.5 17 m4 screw of min. 3 deep lead wire: awg26, ul1993 red color: white color: prepared hole of max. 5 deep 190.5 90.2 2.50.2 13010 l0.5 2 d type 2.2 90 direction of displacement [mm] section a 17 350.5 11.50.5 4 3.5 top view bottom view 45 45 13010 l0.5 2 p.c.d.28 13.0 0.5 3.00.2 2.50.2 direction of displacement enlarged of section a p type lead wire: awg26, ul1993 red color: white color: d type 2.2 90 model l mm asb170c801np0lf 38.4 asl170c801np0lf asb340c801np0lf 58.4 asl340c801np0lf asb510c801np0lf 78.4 asl510c801np0lf asb680c801np0lf 98.4 asl680c801np0lf model l mm ahb550c801np0lf 58.4 ahb700c801np0lf 78.4 ahb800c801np0lf 78.4 both p type and d type have the same overall lengths model l mm asb170c801fp0lf 32.4 asl170c801fp0lf asb340c801fp0lf 52.4 asl340c801fp0lf asb510c801fp0lf 72.4 asl510c801fp0lf asb680c801fp0lf 92.4 asl680c801fp0lf model l mm ahb550c801fp0lf 52.4 ahb700c801fp0lf 72.4 ahb800c801fp0lf 72.4 both p type and d type have the same overall lengths 16 multilayer piezoelectric actuators vol.08 multilayer piezoelectric actuators C asb series metal sealed 85c
3 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com p 0102_asb ? 4/6/2016 metal sealed type multilayer piezoelectric actuators item performance characteristics conditions operating temperature range -25 to +85c when applied with a dc voltage at ambient temperature. when driven by an ac voltage at ambient temperature plus temperature rise due to heat generation. recommended storage condition -5 to +40c maximum driving voltage 150 vdc displacement see table 1 - ratings & part number reference at 150 vdc generated force (compression resistance) see table 1 - ratings & part number reference the force required for restricting the displacement to zero when the maximum driving voltage is applied. capacitance see table 1 - ratings & part number reference f = 1 khz, v = 1 v rms (< 10 f) f = 120 hz, v = 1 v rms (> 10 f) capacitance tolerance 20% dissipation factor 5% or less insulation resistance see table 1 - ratings & part number reference value obtained in one minute at 150 vdc. resonance frequency see table 1 - ratings & part number reference both ends of the element are in free state. typical values of the element under our test conditions. airtightness 1 x 10 -8 atm cc/sec or less temperature cycle test displacement: initial value 30% capacitance: initial value 30% tan : less than initial rated value insulation resistance: 1 m or more room temperature (3 minutes) at -25c for 30 minutes room temperature (3 minutes) at +85c for 30 minutes repetition of 10 cycles of the above high temperature shelf test displacement: initial value 30% capacitance: initial value 30% tan : less than initial rated value insulation resistance: 1 m or more tan : less than initial rated value insulation resistance: 1 m or more appearance: no noticeable defect mark: easily legible solvent: isopropyl alcohol temperature: 23 5c time: immersion for 1 minute heat resistance test displacement: initial value 30% capacitance: initial value 30% tan : less than initial rated value insulation resistance: 1 m or more appearance: no noticeable defect mark: easily legible temperature: 150 3c time: 96 4 h multilayer piezoelectric actuators C asb series metal sealed 85c
4 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com p 0102_asb ? 4/6/2016 environmental compliance all kemet multilayer piezoelectric actuators are rohs and reach compliant. article 33(1) of the reach regulation states that manufacturers and importers of articles (products) are required to notify their customers of the presence of any substances of very high concern (svhc) in their products exceeding 0.1% by weight and provide instructions on safe use of the product. kemet corporation reports regarding the article 33(1) of reach regulation as follows: 1. applicable product: multilayer piezoelectric actuators (ae series and asb series) 2. report for content of reach svhc list: the product(s) above contain a substance that is listed in the 8th update of the reach svhc 54 substances (december 19, 2012) which is included in the 14th update of the reach svhc 161 substances (december 17, 2015) by more than 0.1wt% per product weight. 3. regarding safety of the multilayer piezoelectric actuators (piezoceramic products): the piezoceramic that is used in this product becomes ceramic by sintering powder containing pzt as a main ingredient. it is chemically stable, with minimum risks toward the human body or environment within the intended use of the product. please note that risks could occur in the case of inhalation or accidental oral uptake of powder ceramics. 4. technical product information on the multilayer piezoelectric actuators (piezoceramic products): the manufacturing technique of the piezoceramic products whose main ingredient is lead titanium zirconium oxide (pzt) has been established, and there is no alternative material that can exhibit superior performance than pzt at this moment. please note that the piezoceramic is listed as an exempt on rohs (2011/65/eu) annexiii (7c.1). 5. responsibility of piezoceramic manufacturers: piezoceramic manufacturers report information regarding pzt containment in their products to the customers to obey the article 33 of the reach regulation electrical characteristics all specifcations in this catalog and production status of products are subject to change without notice. prior to the purchase, please contact nec tokin for updated product data. please request for a specifcation sheet for detailed product data prior to the purchase. before using the product in this catalog, please read "precautions" and other safety precautions listed in the printed version catalog. 2015.02.06 9470mpavol08e1501h1 example of ? xing method for without ? ange type ? asb series characteristic data 70 60 50 40 30 20 10 0 50 10 20 30 40 50 60 10 0 0 50 10 6 10 7 10 8 10 9 10 10 5 ?25 ?15 ?5 105 125 25 6545 85 100 150 1 2 3 4 5 6 ?20 0 20 40 60 80 0 10 20 30 40 50 60 100 1000 100 150 0 10 20 30 40 50 60 70 200 400 600 800 asb170c801*p0 asb340c801*p0 asb510c801*p0 asb510c801*p0 asb170c801*p0 asb170c801*p0 asb170c801*p0 asb340c801*p0 asb510c801*p0 asb340c801*p0 asb340c801*p0 asb170c801*p0 asb170c801*p0 asb510c801 *p0 asb680c801*p0 asb680c801*p0 asb340c801*p0 asb510c801*p0 asb510c801*p0 dc bias voltage v drive frequency hz temperature ? temperature ? dc voltagev generated forcen displacement (m) displacement (m) displacement (m) displacement (m) capacitance (f) insulation resistance () applied voltage 150vdc applied voltage 150vdc measured voltage : 150vdc measured frequency : 1khz crest value of voltage 150v (sin waveform) dc bias : 75v fig-10 voltage vs. displacement fig-12 drive frequency vs. displacement fig-11 compression load vs. displacement fig-13 temperature vs. displacement fig-14 dc bias vs. capacitance fig-15 temperature vs. insulation resistance the base of the actuator should be settled to pedestal. keep caution on the electrical insulation for the lead wire. lead wire more than 4mm more than 6mm metal sealed actuator (without flange type) multilayer piezoelectric actuators vol.08 19 multilayer piezoelectric actuators C asb series metal sealed 85c
5 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com p 0102_asb ? 4/6/2016 table 1 C ratings & part number reference part number electrical energy/power capacitance (f) resonance frequency (khz) female thread and flange type resonance frequency (khz) without flange insulation resistance (m) generated force (n) displacement (m) at maximum voltage of 150 vdc asb170c801fd0lf 1.5 14 32 30 800 17.0 +/- 3 asb170c801nd0lf 1.5 14 32 30 800 17.0 +/- 3 asb340c801fd0lf 3 12 18 15 800 34.0 +/- 6 asb340c801nd0lf 3 12 18 15 800 34.0 +/- 6 asb510c801fd0lf 4.5 10 12 10 800 51.0 +/- 9 asb510c801nd0lf 4.5 10 12 10 800 51.0 +/- 9 ASB680C801FD0LF 6 8 9 5 800 68.0 +/- 12 asb680c801nd0lf 6 8 9 5 800 68.0 +/- 12 multilayer piezoelectric actuators C asb series metal sealed 85c
6 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com p 0102_asb ? 4/6/2016 reliability the majority of failure modes on multilayer piezoelectric actuators are short-circuits due to degraded insulation. although the cause of degradation of insulation has not been clarifed, it has been found that the failure rate varies greatly between static uses (dc voltage application) and dynamic uses (pulse voltage application). like other electrical components, piezoelectric actuators can be affected by humidity as well as applied voltage and ambient temperature. kemet has added the metal sealed piezoelectric actuators featuring high reliability by eliminating the effects of the ambient atmosphere. this section describes reliability guidelines for static and dynamic usage of the metal sealed type actuators. reliability of our multilayer piezoelectric actuators is represented by mttf (mean time to failure) in case of static usage. the number of repetitions is considered to represent the reliability in the case of dynamic usage. dc voltage application mttfr of the metal sealed type under the actual operating conditions is calculated from the reference mttfs and the acceleration factor as it is in the case of the resin coated type. however, since the internal element is sealed from the atmosphere, it is not affected by the atmospheric humidity. therefore, equation (1) below is used. ( 1) mttfr = mttfs a v a t m ttfr : estimated value m ttfs : reference value (= 36,000 hours) a v : acceleration factor for drive voltage = (100/v r ) 2 v r : actual operating voltage (v) a t : acceleration factor for ambient temperature = 1.5 (85 -tr)/10 t r actual ambient temperature (oc) t he following calculation is made for the case of use at 25c, and 150 v. m ttfr = 36,000 x (100/150) 2 x 1.5 (85-25)/10 = 3 6,000 x 0.44 x 11.3 1 79,000 hours (20.4 years) pulse voltage application similarly to the resin coated type, it is extremely diffcult to estimate reliability for the metal sealed type products by using an equation. in kemets testing on the asb170c801np0, there was no failure confrmed up to 1,000 hours (equivalent to 100 million pulses applied) under the conditions below: t emperature: 85 2c h umidity: 90 to 95% rh l oad: 200 n to 500 n (20 kgf to 50 kgf) d rive voltage waveform: rectangular wave, 30 hz, 0 to 100 v, duty ratio at 30% multilayer piezoelectric actuators C asb series metal sealed 85c
7 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com p 0102_asb ? 4/6/2016 users guide fixing method ? ca refully prevent the piezoelectric actuators from being bent, twisted or applied tensile force. reference: twisting and tension tolerance reference value remarks ? s elect the mounting bracket (female thread type or fange type) according to the mounting method and install the element utilizing the bracket. ? f ix the element securely so that the generated force and displacement cannot be deteriorated. ? c onnect the driven item at the displacement generating end after securing the mounting portion, so that it avoids unnecessary stress applied at the time of installation. ? t hough this product is designed to apply a compresive force to the internal element by the metal case, avoid any usage that can cause bending, twisting, or tension force when the device is in use. driving method ? c onnect the red lead wire to the positive (+) terminal of the power supply. also prevent reverse voltage application. ? i n driving applications, it is necessary to take consideration of hysteresis, ringing, creep, and other similar phenomenons. for pulse driving, it is also necessary to be aware of self-heat generation, charge/discharge current, and the power supplys impedance. multilayer piezoelectric actuators C asb series metal sealed 85c
8 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com p 0102_asb ? 4/6/2016 users guide contd generated force and load relation all specifcations in this catalog and production status of products are subject to change without notice. prior to the purchase, please contact nec tokin for updated product data. please request for a specifcation sheet for detailed product data prior to the purchase. before using the product in this catalog, please read "precautions" and other safety precautions listed in the printed version catalog. 2015.02.06 9470mpavol08e1501h1 generated force and load relation: static load: initial position (0v position) is dropped by spring constant but total displacement has the same value under static load. spring load (fluctuating load): displacement is changed by relation between generated force and spring constant of actuator. static load: no load value change when actuator moves. fluctuating load: load value changes by spring reaction when actuator moves. 10 5 0 5 10 15 20 displacement m 20 15 10 5 0 5 10 15 20 displacement m load ? 0v 150v 400n m m piezo actuator 0 150 1000 800 600 400 200 0 100 50 0 2 4 6 8 10 12 14 16 18 20 displacement m displacement m voltage load ? spring load of 14.3n/ m spring load of 14.3n/m reduction of displacement model: ae0505d16 load-displacement line of actuator displacement loss reduction of displacement 0 2 4 6 8 10 12 14 16 18 20 piezo actuator multilayer piezoelectric actuators vol.08 25 multilayer piezoelectric actuators C asb series metal sealed 85c
9 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com p 0102_asb ? 4/6/2016 precautions ? c onnect the red lead wire to the positive (+) terminal of the power supply. ? a void electric shocks since a high voltage is in use. ? n ever apply excessive tension to a lead wire. ? d o not handle the product by picking up or moving the lead wire. ? d o not disassemble the case of the metal sealed type. ? m achining of the actuator element and replacement of the lead wire are prohibited. ? a void excessive physical shock. otherwise, the internal piezoelectric ceramic element may be damaged. ? i f the actuator is exposed to high temperatures above 100c or if used after long storage periods (more than three months), the device should be polarized by using the circuit confguration and conditions shown at right. ? d o not apply voltage exceeding maximum rating voltage, or rapid charging and discharging. ? d o not use the actuator in high concentrations of highly infammable gas. ? a lign the center axis of displacement of the actuator with the center axis of the mechanical load. ? w hen operated, the transient response time of the actuator should be less than 1/3 of the resonant frequency in order to prevent damage by ringing. ? s tore the metal sealed type (asb series) preferably in a dry atmosphere (desirably below 40% rh) at ordinary temperatures (-5?c to +40?c). avoid condensation on the products surface. ? s tore actuators where there is no vibration. ? h andle products properly as industrial waste. when disposing, please contact your local waste disposal service and make sure the disposal methods meet all legal requirements. when using our products, the following precautions should be taken: all specifcations in this catalog and production status of products are subject to change without notice. prior to the purchase, please contact nec tokin for updated product data. please request for a specifcation sheet for detailed product data prior to the purchase. before using the product in this catalog, please read "precautions" and other safety precautions listed in the printed version catalog. 2015.02.06 9470mpavol08e1501h1 connect the red lead wire to the positive terminal of the power supply. carefully avoid electric shock since a high voltage is in use. never apply excessive tension to a lead wire. do not handle the product by picking up or moving the lead wire. do not disassemble the case of the metal sealed type. machining of the actuator element and replacement of the lead wire are prohibited. do not handle the resin-coated type ae series with bare hands. otherwise, the reliability of the element would be degraded. do not wash resin-coated type ae series by organic solvant. avoid excessive physical shock resulting from, for example, dropping. otherwise, the internal piezoelectric ceramic element may be damaged. if the actuator is exposed to high temperature above 100 or if it is used after long storage period more than three months , it should be polarized by using the circuit con? guration and conditions shown below. precautions r1 protective resistor r1 1k protective resistor r2 1k polarizing conditions: dc voltage application 0v150 0.2v (to be retained for 10 seconds) 0 r 2 pa s v do not apply voltage exceeding maximum rating voltage, or do not do rapid charging and discharging. these might lead to degradation of the reliability or mechanical fracture. do not use the actuator in high concentration of highly in? ammable gas. otherwise, ignition may occur. use the actuator so as not to cause bending, twisting or tension. furthermore, align the center axis of displacement of the actuator with the center axis of the mechanical load. drive the actuator so that the rising speed is more than three times as much as the resonance period in order to prevent the device from damaging by ringing. store the resin-coated type ae series preferably in a dry atmosphere desirably below 40% rh at ordinary temperatures 5 to 40?c . avoid condensation on the product surface. store actuators where there is no vibration. these products must be handled properly as industrial waste. when disposing, please contact your local waste disposal service. piezo actuator is industrial wastes, make sure disposal method under the laws. 26 multilayer piezoelectric actuators vol.08 1. s afety designs allowing for failures of electronic components used in the system. in general, failures will occur in electronic components at a certain probability. kemet makes every effort to improve the quality and reliability of electronic component products. however, it is impossible to completely eliminate the probability of failures. therefore, when using kemets electronic component products, systems should be carefully designed to ensure the prevention of faulty operation and redundancy in the event of an accident which would result in injury or death, fre, or social damage. please refer to precautions when using multilayer piezoelectric actuators for more details of failures. 2. q uality level of various kinds of parts and equipment in which the parts can be utilized as electronic components have a standard quality level unless otherwise specifed. kemet classifes the level of quality of electronic component products into three levels: a standard quality level, a special quality level, and a custom quality level in which a customer individually specifes a quality assurance program. each of the quality levels has recommended applications. if a user wants to use the electronic parts having a standard quality level in applications other than the applications specifed for the standard quality level, they should always consult a kemet representative before using the electronic parts. multilayer piezoelectric actuators C asb series metal sealed 85c
10 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com p 0102_asb ? 4/6/2016 precautions contd standard quality level: computers, offce automation equipment, communication equipment, measuring instruments, av equipment, household electrical appliances, machine tools, personal equipment and industrial robots. special quality level: transportation equipment (automobiles, railways, shipping), traffc signals, disaster prevention/crime prevention systems, a variety of safety devices and medical equipment which are not directly intended for life-support purposes. custom quality level: equipment for airplanes, aerospace equipment, nuclear power control systems, medical equipment and apparatus or systems for life-support purposes. unless otherwise specifed, the quality level of kemets electronic component products shown in documents such as catalogs, datasheets or technical books are the standard quality level. precautions to be taken when using multilayer piezoelectric actuators (please read these precautions before using our products) 1. b efore using or designing a system using our products, read the precautions and specifcations (such as level of quality) for the products you intend to use. 2. t he main failures with multilayer piezeoelectric actuators are deterioration of insulation resistance, short-circuit, and open-circuit. before using the products, design systems carefully to ensure redundancy, prevention of the spread of fre, and prevention of faulty operation allowing for the occurrence of failures. 3. u se the products after checking the working conditions and rated performance of each multilayer piezoelectric actuator series. selection of ae series (resin coated type) or asb series (metal sealed type) should be based on the intended working temperature and humidity. 3. t his manual is subject to change without notice. the content of this manual is based on data which is correct as of december, 2014 and they may be changed without notice. if our products are used for mass-production design, please consult with a member of our companys sales staff. 4. r eprinting and copying of this manual without prior written permission from kemet electronics corporation is not permitted. 5. i n the event of any problems associated with industrial property of a third party arising as a result of the use of our products, kemet assumes no responsibility for problems other than directly associated with the constitution and manufacturing methods of the product. 6. shou ld any of these products come under the category of strategic goods or services (according to japans foreign trade and foreign exchange regulations), the sender must obtain an export license from the japanese government before said products can be exported outside japan. multilayer piezoelectric actuators C asb series metal sealed 85c
11 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com p 0102_asb ? 4/6/2016 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america northeast wilmington, ma tel: 978-658-1663 southeast lake mary, fl tel: 407-855-8886 central novi, mi tel: 248-994-1030 irving, tx tel: 972-915-6041 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe sasso marconi, italy tel: 39-051-939111 skopje, macedonia tel: 389-2-55-14-623 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe wyboston, united kingdom tel: 44-1480-273082 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5877-1075 shanghai, china tel: 86-21-6447-0707 seoul, south korea tel: 82-2-6294-0550 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6701-8033 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. multilayer piezoelectric actuators C asb series metal sealed 85c
12 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com p 0102_asb ? 4/6/2016 disclaimer this product has been made available through a private label agreement and a development and cross-licensing agreement between kemet and nec tokin to expand market and product offerings for both companies and their respective customers. for more information, please visit http://www.kemet.com/nectokin. all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. multilayer piezoelectric actuators C asb series metal sealed 85c

▲Up To Search▲

Price & Availability of ASB680C801FD0LF

	To Download ASB680C801FD0LF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .